Fluorodyne II filter cartridges are hydrophilic membrane filters designed for reliable retention of bacteria in the final filtration of bottled water.
The Fluorodyne II JSD filter was developed and validated to provide enhanced, secure and reliable removal of microorganisms from bottled water. The cartridge is constructed from serial layers of 0.2 and 0.1 micron polyvynilydine fluoride (PVDF) membrane. The single open ended (SOE) configuration is designed to fit into sanitary housings to ensure effective microbial removal and assembly integrity.
The Fluorodyne II JSD filter is suitable for exposure to in situ steam sanitization cycles for longer service life.
This filter is integrity testable. An in-situ and non-destructive integrity test can provide assurance of filter performance within minutes. Integrity tests help manufacturers avoid costly issues such as product contamination, product losses, reprocessing and production delays, as well as satisfying auditor requirements.
Fluorodyne II JSD filter cartridges, passing an appropriate integrity test, provide a sterile effluent when challenged with Brevundimonas diminuta at ≥1 x 107 CFU per cm2 of effective filtration area.
Fluorodyne II JSD filter cartridges passing the appropriate Forward Flow integrity test have also been shown in laboratory tests to give titre reductions of typically 108 when challenged with Acholeplasma laidlawii ATCC28206 at a challenge level of 107 per cm2 filtration area.
1 Compatible fluids are defined as those which do not swell, soften or attack any of the filter components.2 Maximum operating temperature is 90 °C.
Fluorodyne II JSD filters may be repeatedly steam sterilized.
3 Measured under laboratory test conditions. The actual cumulative time depends on the process conditions.
4.2 liters per minute @ 100 mbar0.76 US gpm @ 1 psi
4 Typical initial clean media differential pressure (ΔP) per 250 mm (10”) cartridge for water at 20 °C (68 °F); viscosity 1 centipoise. For 508, 762 mm and 1016 mm configurations divide the differential pressure by 2, 3, and 4 respectively.
This is a guide to the Part Numbering structure only.
* Available in AB3 only
Please fill out the form below with your details and message, and we'll get back to you as soon as possible.
Product Type: Filter Capsules
Segment: Photovoltaics, Semiconductor